Open Access
Numéro |
EPJ Web of Conferences
Volume 104, 2015
JDN 21 - Neutrons and Materials for Energy
|
|
---|---|---|
Numéro d'article | 01008 | |
Nombre de pages | 31 | |
Section | Application of Neutrons Scattering Techniques to Materials for Energy | |
DOI | https://doi.org/10.1051/epjconf/201510401008 | |
Publié en ligne | 16 octobre 2015 |
- A. Lodini, M. Perrin Analyse des contraintes résiduelles par diffraction des rayons X et des neutrons, Ed. CEA, ISBN 2-7272-0182-6, 1996 [Google Scholar]
- IAEA TECDOC 1457, Measurement of residual stress in materials using neutrons, June 2005 [Google Scholar]
- A. Lodini, T. Baudin, Rayonnement synchrotron, rayons X et neutrons au service des matériaux, Analyse des contraintes et textures, EDP Sciences 2012 [Google Scholar]
- M. Ceretti, Strain and stress analysis by neutron diffraction, ECNS03 Neutrons Stress Analysis Course, September 1-2, 2003 [Google Scholar]
- M E Fitzpatrick and A Lodini, Analysis of Residual Stress by Diffraction Using Neutron and Synchrotron Radiation, Meas. Sci. Technol. 14, 1739, 2003 [CrossRef] [Google Scholar]
- I. C. Noyan and J. B. Cohen, Residual Stress, Measurement by Diffraction and Interpretation, Springer-Verlag, New York, 1987: A, pp. 101–102; B, pp. 125–6; C, pp. 157–159 and D, pp. 126–130 [Google Scholar]
- G. Kostorz, “Neutron Scattering”, Academic Press New York (1979) 227 [CrossRef] [Google Scholar]
- M.H. Mathon and C.H. de Novion, J. Phys. IV France 9 (1999) 127–149 [CrossRef] [EDP Sciences] [Google Scholar]
- M.H. Mathon et al., Journal of Nuclear Materials 312 (2003) 236–248 [CrossRef] [Google Scholar]
- M-H. Mathon, Y. de Carlan, X. Averty, A. Alamo, C.H. de Novion, Journal of ASTM International, October 2005, Vol. 2 N∘ 9, Paper ID JAI12381 [Google Scholar]
- Castelnau O, Béchade J-L, Brenner R, Chauveau T, Bacroix B, et al. In: Miannay D, Costa P, Francxxxois D, Pineau A, editors. Advances in mechanical behaviour, plasticity and damage Proc EUROMAT 2000. France: Tours; 2000. p. 911–6 [Google Scholar]
- Crépin J, Bretheau T, Caldemaison D. Acta Metall Materé 1995; 43(10):3709–19 [Google Scholar]
- N. Letouze, R. Brenner, O. Castelnau, J.-L. Béchade, and M. Mathon, “Residual strain distribution in Zircaloy-4 measured by neutron diffraction and estimated by homogenization techniques,” Scripta Materialia, vol. 47, pp. 595–599, Nov. 1 2002 [CrossRef] [Google Scholar]
- Brachet J.-C, Vandenberghe-Maillot V, Portier L, Gilbon D, Lesbros A, Waeckel N, Mardon J.-P. Hydrogen Content, Preoxidation, and Cooling Scenario Effects on Post-Quench Microstructure and Mechanical Properties of Zircaloy-4 and M5xxx Alloys in LOCA Conditions. Journal of ASTM International, May 2008, Vol 5, N∘5 [Google Scholar]
- A Cabrera Salcedo PhD, Modélisation de la tenue à la trempe et du comportement mécanique post trempe des gaines de combustible de réacteurs à eau pressurisée, Ecole Nationale Supérieure des Mines de Paris, 2012 [Google Scholar]
- Mardon, J. P., Garner, G., Beslu, P., and Charquet, D., “Update on the Development of Advanced Zirconium Alloys for PWR Fuel Rod Claddings,” ANS Portland, 2–6 March 1997, pp. 405–412 [Google Scholar]
- Gilbon, D., Soniak, A., Doriot, S., and Mardon, J. P., “Irradiation Creep and Growth Behaviour, and Microstructural Evolution of Advanced Zr-Base Alloys,” Zirconium in the Nuclear Industry: Twelfth International Symposium, ASTM STP 1354, G. P. Sabol and G. D. Moan, Eds., ASTM International, West Conshohocken, PA, 2000, pp. 51–73 [CrossRef] [Google Scholar]
- S. Doriot, D. Gilbon, J.-L. Béchade, M.-H. Mathon, L. Legras, and J.-P. Mardon, “Microstructural stability of M5 (TM) alloy irradiated up to high neutron fluences,” in ZIRCONIUM IN THE NUCLEAR INDUSTRY: 14TH INTERNATIONAL SYMPOSIUM (Rudling, P and Kammenzind, B, ed.), vol. 1467 of American Society for Testing and Materials Special Technical Publications, pp. 175–201, ASTM Int Comm B10, 2005. 14th International Symposium on Zirconium in the Nuclear Industry, Stockholm, Sweden, Jun. 13–17, 2004 [Google Scholar]
- Simonot, C., “Microstructural Evolution of Zirconium Alloys under Irradiation. Link with the Irradiation Growth Phenomenon,” thesis of Paris XI University, Orsay, France, 1995, réf. CEA-R –5718 [Google Scholar]
- I.C. Elliot, G.A.J. Hack, Proceedings of the ASM International Conference on Structural Applications of Mechanical Alloying, Myrtle Beach, South Carolina, 27–29 March 1990, p. 15 [Google Scholar]
- A. Alamo, H. Réglé, G. Pons, J.L. Béchade, Proceedings on the International Symposium on Mechanical Alloying, Kyoto, Japan, May 1991, Materials Science Forum 88–90 (1992), p. 183 [Google Scholar]
- J.J. Fischer, J.J. de Barbadillo, M.J. Shaw, Proceedings of the ASM International Conference on Structural Applications of Mechanical Alloying, Myrtle Beach, South Carolina, 27–29 march 1990, p.79 [Google Scholar]
- H. Réglé, PhD Université de Paris-Sud Orsay, 1994 [Google Scholar]
- J.-L. Béchade, M. Mathon, V. Branger, H. Regle, and A. Alamo, “Texture analysis of oxide dispersion strengthened (ODS) Fe alloys by X-ray and neutron diffraction,” Journal de Physique IV, vol. 12, pp. 155–163, Jul 2002. X-Ray and Matter Conference (RX 2001), Strasbourg, France, Dec. 04–07, 2001 [CrossRef] [EDP Sciences] [Google Scholar]
- S.Y. Zhong et al., J. Nucl. Mat., 428 (2012) 154 [CrossRef] [Google Scholar]
- J. Ribis, M.-L. Lescoat, S.Y. Zhong, M.-H. Mathon, Y. de Carlan, Journal of nuclear material Vol. 442, Issues 1–3, Supplement 1 (2013) pp. 101–105 [CrossRef] [Google Scholar]
- S.Y. Zhong, J. Ribis, N. Lochet, Y. de Carlan, V. Klosek, M.H. Mathon, Journal of nuclear materials Volume 455 (2014) pp. 618–623 [CrossRef] [Google Scholar]